

Get an instant electrician quote for any Northern Beaches suburb — Manly through Palm Beach. Switchboard upgrades on older brick + fibro, EV chargers in newer estates, coastal moisture protection, and strata-compliant work in apartment blocks. Free audit if you have a quote already.
Quote Checker
Upload it now — get an instant pricing check, compliance review, and the questions to ask before you sign.
Free. Your files stay private.
What We Check
NSW Fair Trading licence number must appear on the quote. We verify against the public register.
Existing board's amp rating, asbestos backing risk, RCBO coverage. Old boards need upgrade before adding load.
Clipsal, HPM, Hager — specified per accessory. Generic "supply switches" lines are red flags.
NSW requires a NoSW certificate after any electrical work. Quote should include lodgement.
Metres of cable, ceiling/wall access, patching responsibility. "Make good" must be defined.
Older homes often lack adequate earthing for modern appliances. Earthing upgrade is sometimes bundled silently — check it is line-itemed.
Same-day or weekend work attracts 1.5×–2× hourly rate. Quote should be explicit if any work falls in after-hours.
Apartment + heritage approvals can add weeks. Quotes that ignore approval lead-time often pad with extra mobilisations later.
Local Context
Northern Beaches (NSW, postcodes 2084–2108) has unique LGA-wide factors that impact your electrician quote.
Pre-1980 homes in Manly, Dee Why, Brookvale, Collaroy commonly have asbestos backing boards or single-phase switchboards needing upgrade for modern loads (ducted aircon, EV charging, induction cooktops).
Newer estates in Davidson, Belrose, Frenchs Forest and Terrey Hills frequently need 3-phase upgrades or dedicated EV circuits. Wallbox installs typically need a Level 2 charger isolator + new circuit from the main board.
Apartment blocks in Dee Why, Manly, Mona Vale require body-corporate sign-off for any work touching common property risers, meter boards, or external lighting.
Oceanside properties (Manly, Curl Curl, Avalon, Palm Beach) need IP-rated outdoor outlets, marine-grade junction boxes, and corrosion-resistant fixings on external lighting.
BAL-rated properties (Belrose, Cottage Point, Ingleside) need bushfire-compliant cable penetrations, sealed external GPOs, and rated enclosures for any external switchgear.
Some Manly, Mosman-adjacent and Avalon heritage properties have council restrictions on external lighting, conduit visibility, and surface-mounted wiring. Approvals add lead time.
Suburbs We Cover
Pick your suburb for local pricing benchmarks and a free quote audit.
FAQs
Standard residential rate sits around $90–$130/hr plus an $80–$120 callout. After-hours and weekend rates run 1.5×–2× standard. Most jobs are quoted as a fixed price rather than hourly once scope is known.
Pre-1980 brick and fibro homes (common across Manly, Collaroy, Dee Why, Brookvale, Narrabeen) typically have single-phase 60–80amp boards with porcelain fuses and no RCBO protection. Modern loads — ducted aircon, induction cooktops, EV chargers, heat pump hot water — exceed safe capacity and need a 3-phase upgrade or larger single-phase board. Budget $1,500–$3,500 depending on scope.
A standard 10A power point will trickle-charge an EV at ~10km of range per hour — fine for a second car, slow for a daily driver. A dedicated 32A Level 2 wallbox (Wallbox, Zappi, Tesla Wall Connector) charges at ~40km/hr and is typical for new EV owners. Install needs a new circuit, isolator, and often a board-side upgrade. Total $1,800–$3,500 installed for residential.
NSW Fair Trading licences are public — check the licence number on the quote against nsw.gov.au/fair-trading. Avoid unlicensed work: it voids insurance, fails resale inspections, and is illegal under the NSW Home Building Act.
We'll connect you with a vetted local Northern Beaches tradie for a second opinion — free, no obligation, no hassle.
We don't contact the tradie. Your files stay private.